In June, a combination of weak demand and improving supply led to a further decline in European standard thermoplastic prices, despite little change to monomer costs.
Polyolefin prices saw the biggest price reductions. Polyethylene and polypropylene price developments bore no relation to monomer cost settlements. The ethylene reference price settled at a rollover with propylene settling down by €10 per metric ton. Low density PE prices fell by €170 per tonne, Linear low density PE prices fell by €150 per onne and high density PE prices were down by €150 per tonne. Homopolymer and copolymer PP prices declined by €200 per tonne.
Polystyrene prices either rolled over or fell slightly after the styrene monomer reference price increased €16 per tonne. It was a similar picture for base PVC prices, while flexible PVC compound prices fell as a result of lower plasticizer costs.
PET prices turned upward in June following a rise of €75 per tonne in the paraxylene reference price. However, a growing volume of cheaper imported material limited price increase to €40 per onne.
In June, polyolefin demand was particularly weak although other polymer classes also experienced lower sales volumes than would normally be expected. Converters took a cautious approach given growing economic uncertainty, soaring energy costs and rising inflation. Buyers were also holding back from making additional purchases as prices were widely expected to drop further in July.
The construction sector boom appeared to be flagging while the automotive sector remained weak. The economic uncertainty also weighed heavily on packaging and consumer goods markets. The beverages sector, on the other hand, saw a surprise demand upturn in June.
Supply improves The supply situation has improved across all product sectors since early summer as several production plants are now back on stream following outages. In the polyolefin sector, most production facilities are operating without interruption. While a number of PVC and styrenics production plants were not fully operational, there was sufficient material available to meet the low level of demand.
Local supply was supplemented by a growing volume of competitively-priced imported material across most product classes.
A selection of the latest supply-side developments in polymer markets are summarized below;
July outlook In July, polymer price trends are showing a mixed picture. Polyethylene and polypropylene prices are declining by triple-digits following respective reductions of €100 per tonne for the ethylene reference price and €120 per tonne for propylene. Polyolefin prices are under added pressure from imports and lower holiday season demand.
PVC prices are also coming under pressure from the ethylene cost fall and lower seasonal sales.
The styrene monomer reference price increased €155 per tonne following higher ethylene costs and a surge of €386 per tonne in benzene costs. Sellers are confident of achieving a small price premium over the SM cost rise.
PET prices are also expected to increase as paraxylene costs are rising sharply.
In June, LLDPE and LDPE sellers did not follow the lead set by a rollover for the ethylene contract price. Instead, they were forced to allow prices to drop as a result of very low demand and improved availability. LDPE prices fell by €170 per tonne with LLDPE prices down by €150 per tonne.
Demand was extremely slack in June with LLDPE and LDPE film sales down sharply compared with the previous month. Economic uncertainty and inflation fears led processors to take a more precautionary stance.
Material availability continued to improve with most production plants operating in a normal manner. Meanwhile, a higher volume of imports started to appear in Europe from a wider range of sources.
In July, the drop of €100 per tonne in ethylene coupled with lower holiday season demand and improving supply are likely to see prices falling at triple-digit rates,
In June, HDPE prices tumbled for the second month in a row, despite a rollover for the ethylene contract price. Blow molding, injection molding and blown film product each saw prices falling by up to €150 per tonne. Very weak sales and rising import volumes were the primary reasons for the further price reduction.
Demand was down sharply across the board as converters sat on inventories in the hope that prices would fall even further.
The supply situation has improved significantly in recent months; imports are more widely available and most production plants are operating without interruption.
This month, HDPE prices are once again under downward pressure following the €100 per tonne reduction in the ethylene contract price. A combination of rising imports and even lower holiday season demand will likely see HDPE prices tumbling by triple-digit rates.
Despite a reduction of €10 per tonne in the June propylene reference price polypropylene prices collapsed sharply on low demand and improving material availability. Both homopolymer and copolymer grades registered a price reduction in the order of €200 per tonne.
With most production plants operating without interruption and a growing supply of imported material arriving in Europe, there was more than enough material available to meet demand, and consequently producers’ inventories swelled.
PP demand was very low across the board with continued weakness of sales to the automotive industry and economic uncertainty weighing heavily on other sectors such as packaging and consumer goods. Converters ordered the bare minimum with prices expected to fall further.
The July propylene reference price declined by €120 prt tonne. PP prices are expected to decline by an even larger amount as demand falls further during the summer holiday season.
Following on from the first decline in base PVC prices for two years in May, base PVC material prices stabilized in Northern European countries but fell slightly in Southern and Eastern Europe. Flexible PVC compounds fell €40 per tonne on lower plasticizer costs while rigid PVC compounds were stable.
While several PVC production plants continued to experience outages, there was sufficient base material available from both local suppliers and form imports to meet demand. PVC compound supply, however, remains rather tighter.
In June, demand was lower than in previous months as the construction boom cooled down and the automotive and film sector remained weak. Converters were also buying just sufficient material with prices expected to fall this month.
In July, PVC prices are likely to fall by more than 50 percent of the €100 per tonne reduction in the ethylene reference price.
In June, an increase of just €18 per tonne in the styrene monomer reference price led to polystyrene prices either rolling over or declining slightly. Supply is improving while demand is low.
Polystyrene supply is improving with most production plants operating as normal following many months of plant outages. Hence, there was more than sufficient material available to meet slack levels of demand.
Converters are taking a cautious approach given mounting economic uncertainty and rising inflation. Many converters were calling off additional volumes in anticipation of even lower prices to come.
This article first appeared in Sustainable Plastics here.
Do you have an opinion about this story? Do you have some thoughts you'd like to share with our readers? Plastics News would love to hear from you. Email your letter to Editor at [email protected]
Please enter a valid email address.
Please enter your email address.
Please select at least one newsletter to subscribe.
Staying current is easy with Plastics News delivered straight to your inbox, free of charge.
Plastics News covers the business of the global plastics industry. We report news, gather data and deliver timely information that provides our readers with a competitive advantage.
1155 Gratiot Avenue Detroit MI 48207-2997