Free Flowing White Fine Powder Polycarboxylate Ether Superplasticizer
Polycarboxylate Superplasticizer ELT-E033 is a poly-ester type polycarboxylate superplasticizer of sprayed powder.
Specifications
Characteristics
As a universal and economical product, ELT-E033 is recommended for production of flowing mortars with normal and special cementitious binder system due to the following characteristics,
l Super water reducing effect for cement based material applications
l Low dosage compared to traditional water reducing agent
l High dispersion, fluidity and workability.
l Improvement of early and final strength of cement based system
- Good dispersability,
- High water reduction
- Excellent adaptability with kinds of cement
- High flowability in mortar or concrete
Packaging and Storage
A. Standard Packing: In 25kg bags inner with PE bags
B. Big Bag or other special packages are possible on request.
Not more than 12 months under condition 5-35°C, dry and cool. Prevent direct sunlight, moisture and be pressed for caking. When it is more than 12 months, it still could be used if there is no caking.
Applications
- Self-leveling
- Structure grout
- Cable grout
- Repair mortar
- Floor screed / thin-overlay
- Cement coating / paint
- Gypsum, ceramic products
- Products containing silica fume, silica flour, pigment, and other ultra-fine particles
- Architectural products
Dosage and Handling
ELT-E033 should be dry-blended with the other dry ingredients at a minimal dosage of 0.1% to 0.3% by total weight of cementitious components. The actual dosage should be determined through suitable tests prior to production and applicatio
Our Company
Thank you for your visiting, Pls feel free to contact us at any time
Ms. Helen Chu
Cell: +86 18668055321
Tel:+86 551 68105826
Fax:+86 551 62372117
Specifications
| Appearance | white powder |
| Water Content (powder)(%) | ≤ 4.0 |
| Ph-value (20ºC) (20% solution) | 7.0~8.0 |
| Total Alkali Content(%) | ≤0.05 |
| Concrete water reduction ratio(%) | ≥30.0 |
Concrete Air Content(%) | ≤ 6.0 |
| Dosage Recommendation(%) in relation to weight of binder | Cementious: 0.16~0.30% Gypsum: 0.05%~0.2% |
Characteristics
As a universal and economical product, ELT-E033 is recommended for production of flowing mortars with normal and special cementitious binder system due to the following characteristics,
l Super water reducing effect for cement based material applications
l Low dosage compared to traditional water reducing agent
l High dispersion, fluidity and workability.
l Improvement of early and final strength of cement based system
- Good dispersability,
- High water reduction
- Excellent adaptability with kinds of cement
- High flowability in mortar or concrete
Packaging and Storage
A. Standard Packing: In 25kg bags inner with PE bags
B. Big Bag or other special packages are possible on request.
Not more than 12 months under condition 5-35°C, dry and cool. Prevent direct sunlight, moisture and be pressed for caking. When it is more than 12 months, it still could be used if there is no caking.
Applications
- Self-leveling
- Structure grout
- Cable grout
- Repair mortar
- Floor screed / thin-overlay
- Cement coating / paint
- Gypsum, ceramic products
- Products containing silica fume, silica flour, pigment, and other ultra-fine particles
- Architectural products
Dosage and Handling
ELT-E033 should be dry-blended with the other dry ingredients at a minimal dosage of 0.1% to 0.3% by total weight of cementitious components. The actual dosage should be determined through suitable tests prior to production and applicatio
Our Company
Thank you for your visiting, Pls feel free to contact us at any time
Ms. Helen Chu
Cell: +86 18668055321
Tel:+86 551 68105826
Fax:+86 551 62372117