English: Hydroxypropyl Methyl Cellulose Abbreviation: HPMC, MHPC

Alias: Hypromellose; Cellulose hydroxypropyl methyl ether; Hypromellose, Cellulose,

2-hydroxypropylmethyl ether. Cellulose hydroxypropyl methyl ether Hyprolose;

CAS number: [9004-65-3]

 Hydroxypropyl methyl cellulose is made of highly pure cotton cellulose as raw material, and is prepared by special etherification under alkaline conditions. The whole process is completed under automated monitoring and does not contain any animal organs, oils and other active ingredients.

HPMC Main Function
1. COATING
-It can be disperse in water easily, has the properties of good color development, good thickening, good emulsiification and good biological stability.
 
2. CEMENT BASED PUTTY
-Easy dry mix formulation due to cold water solubility: lump formation can be easily avoided.
-Good water retention
-Increased water demand
-Easier spreadiing and improved sagging resistance
 
3. GYPSUM BASED PRODUCT
-Great water retention
-Sag resistance
-Mortar yield
 
4. INTERIOR AND EXTERIOR WALL INTERFACE AGENT
-Easy to mix without agglomeration
-Excellent water retention
-Good working performance stability
-Increased water demand
 
5. CERAMIC EXTRUSION MOLDING
-Qingquan product can provide good lubricity and plasticity, it can also provide the operational for ceramic molding
-Extremely low ash content can provide a very dense internal structure after calcination, while delicate rounded surface of product.
 
6. JOINT FILLER
-Workability: it can provide the suitable viscosity, which has a good plasticity and easy to work.
-Water retention: Qingquan product can make the slurry fully hydreated, which extend the wording time and avoid adhesion on the surface for the slurry and not sag.
 
7. SELF-LEVELING MORTAR
-Prevention of bleeding
-Maintain fluidity, reprove water retention
 
8. TILE ADHESIVE
-Great water retention
-Cohesiveness
-Work performance improvement
-Improve the wettability of mortar

Physical properties:

This product is a non-ionic cellulose ether, white powder in appearance, odorless and tasteless, soluble in water and most polar organic solvents and appropriate proportions of ethanol/water, propanol/water, dichloroethane, etc. Diethyl ether, acetone, and absolute ethanol are insoluble, and swell into a clear or slightly turbid colloidal solution in cold water. The aqueous solution has surface activity, high transparency and stable performance. HPMC has thermal gel properties. The product solution forms a gel after heating, and then dissolves after cooling. The gel temperature of products with different specifications is different. The solubility changes with the viscosity. The lower the viscosity, the greater the solubility. There are certain differences in the properties of different specifications of HPMC. The dissolution of HPMC in water is not affected by the pH value. Granularity: The pass rate of 100 mesh is greater than 100%. Bulk density: 0.25-0.70g/ (usually about 0.4g/), specific gravity 1.26-1.31. Discoloration temperature: 180-200ºC, carbonization temperature: 280-300ºC. HPMC has the characteristics of thickening ability, salt drainage, pH stability, water retention, dimensional stability, excellent film-forming properties, and wide range of enzyme resistance, dispersibility and adhesion.

Hpmc Features:

1.Appearance: HPMC is a white to light yellow powder or granular product
2.Solubility: HPMC is nearly insoluble in anhydrous ethanol, ethyl ether and acetone. It is swelled in cold water to form a transparent or a slight cloudy solution. HPMC can be dissolved into some organic solvents and also in water-organic solvent mixed solvents.
3.Graininess:The product particle size is greater than or equal to 80mesh.
4.With reduction of methoxyl groups content, HPMC is increased in gelling temperature and decreased in water solubility and surface activity.

Company information
 

Shijiazhuang Qingquan Cellulose Co., Ltd. is a high-tech enterprise integrating scientific research, production and sales, and technical services. It has a complete set of advanced production equipment, adopts advanced German production technology, strong technical force, and complete and strict manufacturing and testing. The process and product quality are in compliance with relevant standards. 

The company's products not only have a large share in the domestic market, but are also exported to Europe, America, Japan, North Korea, Southeast Asia and other regions, and have established long-term friendly cooperative relations with customers. Shijiazhuang Qingquan Cellulose Co., Ltd. has invested more than 100 million yuan. The factory covers an area of 120 acres and has more than 220 employees, including 50 scientific and technical personnel. The company has complete analysis and testing equipment to ensure that the incoming and outgoing materials can meet the process needs, and can produce and provide different types and specifications of cellulose products according to the special requirements of customers. The company's leading cellulose products are widely used in chemical, building materials, architectural coatings, daily chemical, food and pharmaceutical industries, and sell well in more than 20 domestic provinces and cities.

Package and delivery:

FAQ